IBM Feature Tool Crack With Full Keygen X64
IBM Feature Tool Cracked Accounts provides support for some of the features of our Deskstar and Travelstar high performance ATA hard disk drives. It allows you to see some of the performance and general settings on your hard disk drive and to re-map the physical address of the drive to a new location.
The tool can be used by setting options in the BIOS and by entering data on a console terminal. If you are using a DOS-based operating system, the tool requires a DOS partition in order to run.
Feature Tool is available for:
￭ IBM PC-AT
￭ IBM PC-XT
￭ IBM PC XT/XT2
￭ IBM PC AT with 4MB RAM
￭ ThinkPad
￭ ThinkPad 260
￭ ThinkPad 280
￭ Other IBM PC ATs
￭ Other IBM XT/XT2s
￭ IBM ATs with an Ultra DMA mode
￭ IBM/MSDOS 2.0/2.1
￭ IBM/OS/2
What's New in This Release:
￭ Fixed a problem in 68K and OS/2.
￭ Fixed a problem with the DOS boot record.
￭ Added support for other newer IBM drives.
IBM Feature Tool PPC and M68K Installer:
IBM Feature Tool PPC and M68K Installer is a M68K-based application for running IBM Feature Tool. It can be used for running IBM Feature Tool in a M68K program or DSP.
IBM Feature Tool PPC Installer:
IBM Feature Tool PPC Installer allows you to install IBM Feature Tool in a M68K program or DSP.
IBM Feature Tool OS/2 Installer:
IBM Feature Tool OS/2 Installer allows you to install IBM Feature Tool in an OS/2 program or DSP.
Note: If you are installing IBM Feature Tool on a DR-DOS 7.04 or higher, the application requires a new executable called txtsetup and additional DLL's. If you are installing IBM Feature Tool on a DOS 6.11, 6.10 or 6.20, the application requires the use of a copy of the IBM DOS 6.11 mini-installer (MakeInstall.exe).
IBM Feature Tool for DOS Installer:
IBM Feature Tool for DOS Installer is a DOS-
IBM Feature Tool Crack+ License Code & Keygen Free Download
￭ Control the power management of IBM i ATA hard disk drives. You can enable or disable the use of the read-ahead and write cache, and set the drive to either the quiet or normal acoustic emanation settings. This feature is accessed by the advanced control feature in the OS/400 ProdVersion or at the drive level through OS/400's ATA subsystem.
￭ Disable the SATA drive's Ultra DMA mode (if the drive controller supports it).
￭ Change predefined capacity. This is useful if there is a limitation in the BIOS.
￭ Switch the SATA interface from port 1 to port 0 or vice-versa.
￭ Change the Advanced Power Mode setting.
￭ Show the current drive temperature (Celsius and Fahrenheit) along with the current drive power usage.
￭ Configure the SATA interface by changing its speed and enabling or disabling Spread Spectrum Clocking.
This IBM Feature Tool Full Crack is for OS/400 ATT support only. This is a simple tool to control the ATA features of IBM i ATA hard disk drives and shows the current temperature for the drive.
Key features of IBM Feature Tool:
￭ Enable or disable the read-ahead or write cache.
￭ Change the drive Automatic Acoustic Management settings to the:
￭ Lowest acoustic emanation setting (Quiet Seek Mode), or
￭ Maximum performance level (Normal Seek Mode).
￭ Change the predefined capacity of the drive. This option can be used in situations where there is a BIOS limitation and the drive is not recognized. See the  Users Guide for specific details.
￭ Switch the Ultra DMA mode
￭ Change Advanced Power Mode - allows you to change between the lowest power consumption and the highest power consumption (maximum performance level).
￭ Show Drive Temperature - shows the current drive temperature in Celsius and Fahrenheit.
This IBM Feature Tool is for OS/400 ATT support only. This is a simple tool to control the ATA features of IBM i ATA hard disk drives and shows the current temperature for the drive.
Key features of IBM Feature Tool:
￭ Enable or disable the read-ahead or write cache.
￭ Change the drive Automatic Acoustic Management settings to the:
￭ Lowest acoustic emanation setting (Quiet Seek Mode), or
￭ Maximum performance level (Normal Seek
f0d5c1b395

Related links:

Items