Procedure:

Step 1: Gather all your materials in one place. We recommend to do this experiment outside your house in case any damage is made.

Step 2: Cut the ¾ PVC pipe in 5 pieces with the saw; 3 large ones and 2 small ones.

Step 3: With the sandpaper, take out the excess of material that is left after cutting with the saw.

Step 4: Take a small piece of pipe and glue it to one of the valves. Take now a large one and glue it to the other end.

Step 5: Glue with the PVC cement the pipe elbow to the large piece of the pipe.

Step 6: Take a small piece and glue it to the elbow.

Step 7: Grab one of the large pieces and glue it to the center hole of the tee.

Step 8: In the remaining hole in the tee section glue the plastic or glass bottle.

Step 9: Take hold of another valve and glue it to the large piece connected to the elbow.

Step 10: With the small remaining piece, glue it to the end of the valve, and connect the hose to it, in a way that is facing upwards.

Step 11: Test your water ram by dropping it from different heights, and record your data.

Items