Liquefaction Analysis Program 4.0.0 Crack+ Download 2022 [New]
Firstly, this program calculates penetration in different types of soil or soil constituents and also calculates Rice-Butterfly Effect to the depth of the liquefaction.
A separate screen for each combination of soil layer, factor and test method (explicit calculation, calculation by default or calculation through formula).
This program can carry out correction for the depth by using rice-butterfly effect (RBE) or simply you can change it by yourself.
It is possible to calculate the property or field test parameters such as shear wave velocity (Vs), ultimate bearing capacity (UBC) and angle of compaction. There is also a separate screen for each factor to be taken into account.
If you choose the recommended formula, Liquefaction Analysis Program can calculate the depth correction by changing the factor for the depth and you can see the result of Liquefaction Analysis Program on the same screen.
Liquefaction Analysis Program is designed as a very flexible and comprehensive liquefaction analysis software which considers more than 50 different options and formulas. Furthermore, Liquefaction Analysis Program will help you calculate depth correction factors according to the formula you select.
Liquefaction Analysis Program covers these field tests:
· Standard Penetration Test (SPT)
· Becker Penetration Test (BPT)
· Shear Wave Velocity (Vs)
Soil resistance (CRR) is calculated based on:
· Japanese Bridge Code
· Chinese Code
· Seed et al. (1983)
· Tokimatsu-Yoshimi (1983)
· Shibata (1981)
· Kokusho et al. (1983)
· Vancouver Task Force (2007)
· NCEER Workshop (1996)
· University of California at Davis (2004)
· Cetin & Seed (2004)
Liquefaction Analysis Program Description:
Firstly, this program calculates penetration in different types of soil or soil constituents and also calculates Rice-Butterfly Effect to the depth of the liquefaction.
A separate screen for each combination of soil layer, factor and test method (explicit calculation, calculation by default or calculation through formula).
This program can carry out correction for the depth by using rice-butterfly effect (RBE) or simply you can change it by yourself.
It is possible to calculate the property or field test parameters such as shear wave velocity (Vs), ultimate bearing capacity (UBC) and angle of compaction. There is also a
Liquefaction Analysis Program 4.0.0
Liquefaction Analysis Program is designed as a very flexible and comprehensive liquefaction analysis software which considers more than 50 different options and formulas. Furthermore, Liquefaction Analysis Program will help you calculate depth correction factors according to the formula you select.
Liquefaction Analysis Program covers these field tests:
· Standard Penetration Test (SPT)
· Becker Penetration Test (BPT)
· Shear Wave Velocity (Vs)
Soil resistance (CRR) is calculated based on:
· Japanese Bridge Code
· Chinese Code
· Seed et al. (1983)
· Tokimatsu-Yoshimi (1983)
· Shibata (1981)
· Kokusho et al. (1983)
· Vancouver Task Force (2007)
· Cetin & Seed (2004)
Liquefaction Analysis Program Description:
This program extracts the strength of the underground infrastructure from the measured soil attenuation of ground motion caused by ground-borne seismic waves using the finite element method, and simulates the behavior of those structures. The program can handle heterogeneous material structures.
Key Features:
1.It is an important tools in structural engineering for analysis of seismic loads.
2. It is based on the finite element method and has a wide ranging set of built-in formulas for design.
3.It has a user-friendly interface and has many built-in functions, such as mesh, set boundary condition, etc.
4.It can perform design for EI of seismic susceptible areas, such as tunnel, building, bridge, tunnel underpass, dam, tunnel underpass, tunnel, landfill, trench, and so on.
5.It can calculate the seismic safety factor.
6.It can provide the predicted value under the minimum criterion of structural engineering.
7. It is a link for tensile strength and shear strength of the material, which can be used to define their properties.
8.It can be a stand-alone software by using the FEM code.
9.The calculation itself was carefully tested.
10.The source code is provided for all those who wish to improve the usability of the program.
11.The seismic load cases available are described in the references.
12.The analysis results for EI of all these cases are available.
13.The program is designed for use by seismic engineers, structural engineers, civil engineers, geotechnical engineers, and the user community
f0d5c1b395

Related

Items