Ad900 Key Programmer Software Download
How to use AD900 Pro:
There are several ways to work with AD900 Pro.
1. EZ Sync
EZ Sync can be used for all chip which supports 8C and 8E in the transponder chip. For example, AD900 Pro has 8C and 8E chips, you can use them together. The steps for the EZ Sync is simple:
Add key or key fob to the reader before start the programming.
Insert the programming card and switch on the reader and press (Program) button.
The program will start and will be connected to the reader.
Exit from the program (switch the reader off) and turn the key or key fob on.
The reader will receive an EZ Sync sequence.
Exit from the reader and press the Stop button.
Remove the programming card and key from the reader.
Please refer to the manual to find out more about the functions of the AD900 Pro and other EZ-Sync steps.
2. USB connection
The AD900 Pro program can also be done by USB connection. Follow the steps below:
Plug in the USB cable to the reader and turn on the reader.
Plug in the programming card to the reader and switch on the reader.
Insert the programming card.
Turn the reader off.
Plug out the programming card from the reader.
The programming is done.
Please refer to the manual to find out more about the functions of the AD900 Pro and other USB connection steps.
3. Auto-Sync
The AD900 Pro can be used in the automatic mode when used with key fob. For example, you can use it to write keys to vehicles without a transmitter. The following steps will guide you through the process:
Insert the programming card into the reader and switch on the reader.
Plug in the key or key fob into the reader and turn on the reader.
The reader will receive an Auto-Sync sequence.
Please refer to the manual to find out more about the functions of the AD900 Pro and other Auto-Sync steps.
Key Features
1. 4D Function:
Thanks to the 4D function, the AD900 Pro can not only do transp
44926395d7

Ad900 Key Programmer Software Download giadjar