RoMac Digital Distortion Meter
1. Frequency: 20 Hz - 15000 Hz
2. Resolution: +/- 13 Hz
3. Sweep Time: 1 Second
4. Wave Type: Sine
5. Test Signal: Amplified
6. Test Resolution: +/- 13 Hz
7. AutoLock: Yes
8. Input: Mic and Line
9. Output: Mic and Line
10. Output: Line In and Line Out
11. Input Strobe: Yes
12. Input Toggle: Yes
The new Logical Limit design from Motorola is not only "More Stable" but now it has "Robustness" to boot. The M0x4LMT and M0x4MMT make use of a new patented Multi-Mode Multi-Channel Low Noise Amplifier (LMNA) technology that boosts rejection to well above those of other amplifier technologies.
LMNA amplifiers reject common mode noise, such as those generated by nearby electrical devices and people. In addition, LMNA amplifiers dynamically adjust to line voltage and line signal levels, rejecting noise in a real-time manner. The result is a more robust amplifier that can withstand environments where ambient noise is particularly noisy, such as environments with many people or electrical devices near the amplifier.
Signal-to-Noise Ratio (SNR) measurements at different settings for high and low power modes, compared to a leading competitor's amplifier measured with the same test signal and conditions, is shown below. The M0x4LMT and M0x4MMT provide SNR of 40dB or greater at all settings.
Mode 1:
M0x4LMT: Average Line, Low Power: -54.0dB (SNR: 44.6dB)
M0x4MMT: Average Line, Low Power: -53.9dB (SNR: 46.9dB)
Mode 2:
M0x4LMT: Average Line, High Power: -52.5dB (SNR: 42.5dB)
M0x4MMT: Average Line, High Power: -52.6dB (SNR: 41.5dB)
Mode 3:
M0x4LMT: Average Line, High Power: -51.7dB (SNR: 41.3dB)
M0x4MMT: Average Line, High Power: -52.4dB (SNR: 41.1dB)
Mode 4:
M0
RoMac Digital Distortion Meter Crack+ Activation Free [April-2022]
The RoMac Digital Distortion Meter is able to analyze your sound card's distortion product signals. These levels are usually not visible by sound card monitor or oscilloscope screens. However, when they exceed your defined threshold, the sound card will try to lower the distortion to protect the audio system. In order to accurately measure the distortion levels and protect your listening system from self imposed distortion products, the RoMac Digital Distortion Meter automatically removes these artifacts. The Digital Distortion Meter's ability to measure audio signals is based on the fact that a sine wave does not produce distortion products. Audio signals that do produce distortion products are most commonly a combination of sine, square, and saw tooth waveforms. These distortion products usually exceed the bandwidth of most sound cards. The Distortion Meter tests the band limited signal that the sound card passes to an audio amplifier. The Distortion Meter can be used to test either one or both channels of a sound card. 
The Digital Distortion Meter can measure all types of distortion products such as multiple harmonics and IMD products. Audio Application Scenario 1: The Digital Distortion Meter can be used in conjunction with other Audio Signal processing tools to test a wide variety of audio system components. For instance, one might use the Distortion Meter to test the final output stage of audio amplifiers and Headphones. Amplifier design work can be greatly aided by testing the audio system before building and installing a new audio amplifier. The Distortion Meter will detect excessive distortion products caused by one or more of the amplifier's internal components. Thus the Distortion Meter can detect a problem before it is too late and before the amplifier is built, tested, installed and operating. The Distortion Meter can be used simultaneously with the other tools on the other audio system components under test. The Digital Distortion Meter can be used to test both channels of a sound card. Audio Application Scenario 2: The Distortion Meter can be used to test the Audio Equalizer functions on a sound card. After the test, it can be used to easily dial in the EQ settings again. Audio Application Scenario 3: The Distortion Meter can be used to test the output stage of a Sound Card. It can also be used to determine if the sound card's DAC level control has been adjusted too high or low. Audio Application Scenario 4: The Distortion Meter can be used to test the tone control functions on the sound card. Audio Application Scenario 5: The Distortion Meter can be used to test the volume controls on a sound
f0d5c1b395

Related

Items